What should I pay attention to the safe operation of CNC cylindrical grinding machine?

Safe operation of CNC cylindrical grinding machine is very important and any negligence may lead to serious consequences. Therefore, when using a CNC cylindrical grinder, you should be careful and follow the correct operating procedures and safety regulations. CNC cylindrical grinder is a high-tech equipment, in order to ensure its safe operation, you need to pay attention to the operation of the precautionary approach. The following are matters that should be noted for the safe operation of CNC cylindrical grinding machines.

First, check whether the grinding wheel is normal before grinding steel

The working mechanism of CNC cylindrical grinding machine is to grind through the grinding wheel, if the grinding wheel is not installed correctly or damaged and not replaced in time, it will have an impact on the grinding process. Therefore, before grinding steel, it is necessary to check whether the grinding wheel is installed correctly, whether there is damage or cracks, etc., and to confirm whether the choice of grinding wheel is correct. In addition, because the grinding wheel will be due to the use of wear and need to replace the grinding wheel to ensure that the grinding effect.

Second, adjust the parameters of the machine

CNC cylindrical grinding machine operation needs to set the corresponding parameters, such as grinding depth, feed, etc., therefore, in the operation of the machine parameters need to be adjusted. Parameters should be set in strict accordance with the production requirements of the operation, to ensure that it works in accordance with the set parameters. Be sure not to adjust or change the machine parameters too quickly during operation, otherwise it will have a serious impact on the grinding effect, and may even lead to safety problems.

Third, grasp the operating procedures of the machine tool

In the operation of CNC cylindrical grinding machine to understand the operation process, master each step of the operation order and method. Before operation, you need to clearly understand the processing object model, specifications and processing technology requirements, etc., but also need to understand the workpiece in the grinding process of a variety of abnormalities in the treatment method. In the operation of the need to follow the correct process, step by step operation, in strict accordance with the machine tool operating procedures to avoid operational errors.

Fourth, wear good protective gear, pay attention to operational safety

In the operation of CNC cylindrical grinding machine, the staff must wear good protective equipment, such as gloves, goggles and so on. At the same time, in the operation should pay attention to prevent the machine tool overload, grinding process generated by the dust or iron filings and other substances on the operator's body hazards. Especially in the grinding of high hardness steel to be extra careful, while timely cleanup of the machine bed accumulation of dust and scrap iron block, in order to avoid its accumulation of too much to lead to machine abnormalities or even downtime and other adverse consequences of the generation of.

Five. Routine maintenance to ensure equipment safety

Daily maintenance is an important factor to ensure the safe operation of CNC cylindrical grinding machine. In the process of using the equipment to carry out regular inspections, and the abnormal situation for timely maintenance and processing. At the same time, but also to keep the equipment clean and hygienic, regular maintenance of equipment cleaning and lubrication. All maintenance operations need to be carried out in the case of machine tool shutdown and power failure to ensure the personal safety of the operator. Only careful maintenance and maintenance, in order to protect the normal operation of the machine tool, to avoid accidents!

In summary, in order to ensure the operation of CNC cylindrical grinding machine safety, the operator needs to fully understand the use of the machine and operating procedures, adjust the parameters of the machine tool, do a good job of protective measures, related maintenance and so on. Only by maintaining good working habits and attitudes can the machine operate normally for a long time and protect the personal safety of the operators.